(2) 1997 Cleaver Brooks CBE100-200 200 HP 150 PSI Oil Steam Boilers

(2) 1997 Cleaver Brooks CBE100-200 200 HP 150 PSI Oil Steam Boilers

Contact us for price

Location:New Hampshire

Description

Quantity of two: 1997 Cleaver Brooks CBE100-200 packaged firetube high-pressure steam boilers, 200 HP, 150 PSI, No. 2 light oil fired, located in New Hampshire, USA. Built by Cleaver-Brooks of Canada, Limited, Stratford, Ontario. Specs below are from the nameplate of one unit. The second is a matching unit; a second nameplate was not provided. Nameplate input is 8,370,000 BTU/hr with a 60 GPH oil rating; the gas field is dashed out. Cleaver-Brooks Model CB nomenclature reads this as Series 100 (light oil / No. 2 only) and 200 boiler horsepower. The stamped input and oil rate match Cleaver-Brooks Model CB steam ratings for 200 HP. High-pressure steam and oil firing were confirmed by the seller.

Yard tag: BSCB200HP6332

Equipment specifications

- Quantity: 2
- Manufacturer: Cleaver Brooks (Cleaver-Brooks of Canada, Limited, Stratford, Ontario)
- Product line: CB Packaged Boiler (Model CB four-pass dryback firetube)
- Model: CBE100-200
- Year built: 1997
- Type: packaged firetube high-pressure steam
- Fuel: No. 2 light oil only. Nameplate gas field is dashed; 60 GPH oil is stamped. Not a combination burner.
- Design pressure: 150 PSI
- Location: New Hampshire, USA
- Yard tag: BSCB200HP6332

Literature typical values (Cleaver-Brooks Model CB steam ratings and dimensions, 200 HP column — not measured on these units):

- Rated steam capacity: 6,900 lb/hr from and at 212°F (per boiler)
- Rated output: 6,695,000 BTU/hr (per boiler)
- Fireside heating surface: 1,000 sq ft; waterside: 1,092 sq ft (per boiler)
- Design: 4-pass dryback firetube; boiler I.D. 60 in
- Approx. dimensions at 150 psig: overall length 232-1/2 in, overall width 85 in, overall height 88 in; 4 in steam nozzle (ANSI 300# flange); 16 in flanged vent stack
- Approx. shipping weight at 150 psig: 16,300 lb; normal water capacity: 8,625 lb (per boiler)

Performance ratings

- Boiler horsepower: 200 HP each (from the model suffix; confirmed by the nameplate input)
- Input: 8,370,000 BTU/hr (nameplate of one unit)
- Oil firing rate: 60 GPH (nameplate of one unit)
- Rated steam output: 6,900 lb/hr from and at 212°F per boiler (Cleaver-Brooks Model CB steam ratings, 200 HP)

Burner system

- Integral Cleaver-Brooks packaged burner, No. 2 light oil only
- Oil atomization: air-atomizing (Model CB standard)
- Nameplate gas rating: none (field dashed)
- Literature lists a 15 HP blower motor and 1/2 HP No. 2 oil-pump motor as typical for a 200 HP oil-fired Model CB; not verified on these units.

Additional information

- Condition: used, currently installed in a plant room in New Hampshire, USA; removal and rigging required
- The yard photo shows both Cleaver-Brooks firetube boilers side by side. This listing is a quantity of two.
- Included equipment: two packaged boilers with integral burners, controls, and bases, as shown. No feedwater tank or other auxiliaries are identified.
- A "460 VOLTS" label is visible on the foreground boiler in the yard photo. Voltage is not confirmed for both units.
- Buyer is responsible for transport and rigging
- Contact for price


Specifications

ManufacturerCleaver Brooks
ModelCBE100-200
Year1997
ConditionUsed
Stock NumberBSCB200HP6332