2007 Fulton FT-0160C Oil Heater

Skid Packaged Fulton FT-0160C with High Temperature Dickow

Pump and 100 Gallon Expansion Tank and Nitrogen Balance.  

Built NEW in 2007.

Model FT-0160C Fulton Fuel-Fired Coil Design, Thermal Fluid Heater

Natural Gas Fired

Modulating Burner

Fuel Train Built to CSD-1 Standards

Derated to 900,000 BTU/Hr Net Output (can be set back to factory 1.6 MM BTU)

Standard Controls

Complete with NEMA 1 Control Panel

All Required Safety Devices for Max Operating Temperature of 750 Deg. F

Flow Rate: 100 GPM

460/60/3 TEFC Motor Voltage

120/60/1 Control Voltage thru Incorporated Step Down Transformer

All Components Capable of Operation @ 800 Deg. F

Note: Operation is based on DowTherm A Heater to include the following:

Sch. 80 Coil

Safety Relief Valves Set @ 300 psi

Diaphragm Seal Capillary Filled Pressure Indicators

Diaphragm Seal Capillary Filled Pressure Switches

Diaphragm Seal Capillary Filled Differential Pressure Switch

Socket Weld Isolation Valves (For Instrumentation)

Certified Thermowells for Process 2nd High Limit Thermocouple

Note: All Heater Are Manufactured to ASME Code, Section I, Inspected and Certified.

Note: Heaters are built with no refractory bricks & minimal refractory cement to prevent overheating & cracking of thermal fluid inside the heater should a power or circulating pump failure occur.

Also Included on Skid Package:

Dickow Mag-Drive Air Cooled Centrifugal Pump

Designed for 800 Deg. F Maximum Operating Temperature

100 GPM @ 55 psi

7.5 HP 3500 RPM TEFC Motor

Motor Starter 460/60/3 Voltage

Carbon Steel 100 Gallon Expansion Tank

Built to ASME Section VIII

Stamped for MAWP of 300 psi @ 800 Deg. F

Tank Complete With High Temperature Level Switch

High Pressure Nitrogen Regulator

Back Pressure Regulator

Safety Valve

Pressure Gauges

Above equipment skid mounted including expansion tank. Skid mounting includes:

Bellow Sealed Isolation Valves

High Temperature Flexes and Strainers

B-7 Bolts

Spiral Wound Gaskets

Remote Set Point for Controller UT550

Communications Package for UT550

Four Valve Reversing Manifold

Make / manufacturer: Fulton

Model name / number: FT-0160C

C392021-M534