Hitachi Seiki CH-250 Super Hicell Multitasking Lathe

Contact us for price


orCall 305-428-2777


Offered for Sale is this Rare 2001 Hitachi Seiki Super Hicell CH-250 , 7 axis CNC Multitasking Lathe with (extra) 4 ft. extended bed. For the price of an ordinary 10 inch CNC lathe, parts can come out finished. This machine will mill, drill, and ridged tap at ANY angle.
4-5 axis simultaneous control milling --Full ZB axis 10/7.5 hp Sub spindle -- Q Setter -- Laser Heidenheim Measuring System (minus probe) -- 60 Tool Magazine -- Full B axis 7.5/5.5 hp mill/drill spindle head 80-8000 rpm -- Full C axis 25/20 hp direct drive oil cooled main spindle -- over 47" X axis, over 6" Y axis, over 60" Z axis -- over 84" between center or chucks -- Very low hours and still in excellent condition. I purchased this machine used from Woodward-Governor out of Colorado 6 years ago with less than 2000 hours. Was used there mostly for prototyping. I rarely used it in my small aerospace shop do to my work load switching to mostly assembly.
X axis, Y axis, Z axis, B axis (spindle head), C axis (main spindle), ZB axis (sub spindle), CB axis (sub spindle pos.)

Fanuc / Seicos 16T Control with 10.4" color TFT monitor (graphic display)
10" main chuck , 8" sub spindle chuck
30-4000 rpm main spindle (A2-8 nose) , 50-5000 rpm sub spindle (A2-5 nose)
1.2 second tool change
Scale feedback on X and Y axis
Eco/eco non lubricated guideways (no auto lubrication needed)
NT40 short taper on rotory and stationary spindle head
1181 ipm rapid
80m memory
.001 deg. increment on B , C axis
Direct tapping at any angle to .001
air seals on all 3 spindles
2.56" thru main spindle 3.07" max. spindle bore
100 gallon ext. coolant tank with High Pressure pump
RS232 / ethernet connectivity / card slot
Many tools come with it. Also have full set of Books. Easy to learn and operate. Under power and can be examined. Have more photos and videos.



ManufacturerHitachi Seiki CH-250 Super Hicell Multitasking Lathe